How do I resolve an 'Unknown ca' error on Kyocera Printer Accessories?
If your Kyocera Printer Accessories display an 'Unknown ca' error, it means the installed CA certificate cannot verify the server certificate in the RADIUS server. Make sure to install a correct CA certificate.
What to do if I get a Hardcopy Security Printing error on my Kyocera TASKalfa 650c?
This error indicates that printing the data, including its security pattern, is not permitted. Contact your service representative.
Why does my Kyocera Printer Accessories say 'No certificate'?
If your Kyocera Printer Accessories show a 'No certificate' error, it means no certificate is installed, or the certificate file name is not correctly specified. Ensure that the certificate is installed and that you correctly specify the certificate file name.
What to do if I get a 'Certificate expired' error on Kyocera Printer Accessories?
If you see a 'Certificate expired' error on your Kyocera Printer Accessories, it means the certificate has expired. Verify that the time is set correctly or check if the certificate has indeed expired.
How to fix a bad certificate error on Kyocera Printer Accessories?
If your Kyocera Printer Accessories display a 'Bad certificate' error, it means an unsupported certificate is installed. Reinstall the appropriate certificate. This equipment supports md5RSA and sha1RSA certificates only.
What to do if Kyocera Fax Machine says 'Too Many Tel # Digits'?
If your Kyocera Fax Machine displays 'Too Many Tel # Digits', it means 128 digits or more were registered for a chain dial communication. Confirm the number of digits dialed and register the numbers again.
Why Kyocera Fax Machine says 'Not allowed now'?
If your Kyocera Fax Machine displays 'Not allowed now' because a further polling transmission reservation was attempted when one was already reserved, either wait for the polling transmission jobs to be completed, or check the jobs and delete reserved jobs.
Why does my Kyocera Fax Machine say 'Sorry not possible'?
If your Kyocera Fax Machine displays 'Sorry not possible' because on-hook or direct TX was attempted during communications, wait for the current communications to end and then retry your communication.
What to do if Kyocera Fax Machine shows job memory full?
If your Kyocera Fax Machine displays 'Job memory full' because the total number of destinations for reserved jobs exceeded 1000, either wait for job reservations to complete, or check the jobs and delete reserved jobs.
What to do if Kyocera Fax Machine says job reservation full?
If your Kyocera Fax Machine indicates that the job reservation is full because the number of reserved jobs has exceeded 100, either wait for existing job reservations to complete, or manually check the jobs and delete reserved jobs.
General| Category | All in One Printer |
|---|---|
| Print Speed (Black) | 65 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Max Resolution (DPI) | 1200 x 1200 dpi |
| Standard Paper Capacity | 1, 150 sheets |
| Duplex Printing | Yes |
| Operating System Compatibility | Windows, Mac, Linux |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Type | Color |
| Paper Size | Letter, Legal, A4, A5, B5 |
| Connectivity | USB, Ethernet |
| Network Connectivity | Ethernet |
| Fax Resolution | 400 x 400 dpi |
Provides instructions on how to interpret symbols and sections within the manual.
Explains the meaning of various symbols used to convey important information.
Describes the web-based job and device management tool and its capabilities for end-users and administrators.
Details the steps required to access the COMMAND CENTER web utility from a client computer.
Explains the components and layout of the COMMAND CENTER web interface for end users.
Outlines the information displayed on the [Device] tab, including device details, options, and paper status.
Explains the meaning of various icons that indicate equipment status, errors, or maintenance requirements.
Covers displaying, deleting, and releasing print jobs currently in the queue.
Provides steps for displaying and deleting fax and internet fax transmission jobs.
Details how to display and delete scan jobs that are currently queued.
Explains how to view historical logs of print jobs performed on the equipment.
Describes how to view logs of transmissions sent via fax, internet fax, and email.
Explains how to view logs of received faxes, internet faxes, and emails.
Covers how to view logs of scan jobs that have been performed.
Provides instructions on creating and managing private and public templates for device operations.
Details how to add, edit, delete, and manage contacts and groups in the address book.
Explains how to set up, edit, and delete mailboxes for document storage and retrieval.
Describes how to display and view the total and department-specific counters for printed, copied, and scanned pages.
Outlines the administrative capabilities of COMMAND CENTER for configuring and managing the equipment.
Provides the procedure for logging into COMMAND CENTER in administrator mode for full control.
Covers various configuration settings accessible via COMMAND CENTER, including device, network, and service settings.
Details maintenance tasks like software updates, data backup/restore, and log management performed via COMMAND CENTER.
Introduces optional features that can be configured via COMMAND CENTER if installed.
Describes how to enable and configure IPsec for secure data encryption and communication.
Provides detailed steps for configuring IPsec policies, filters, and IKE keys.
Guides users through the process of installing certificates on a client PC for secure network access.
To Next Page
