LELY Attis PT 130 User Manual

3.11 Stop wrapping
Procedure
1. Stop driving the tractor.
2. Switch off the E-link manual controller.
3. Put the hydraulic system in the tractor (system I) in neutral.
Wait for all moving parts of the Attis to stop.
WARNING
4. Switch off the tractor engine
5. Disconnect the E-Link Plus manual controller.
6 Store the E-link plus in a clean, dry and warm place outside
the influence of frost, heat and other extreme (weather)
conditions.
3-30 Operation
W-H003.1403EN

LELY Attis PT 130 Specifications

General

Brand	LELY
Model	Attis PT 130
Category	Farm Equipment
Language	English