7.3 Quick referencecharts
7.3.1 Default menu
1. Turn on the E-Link (Default screen)
2.
Keep holding while in this menu.
Press and hold to cycle through the digit from 0-9.
Release to select the number and go to the next
digit.
Press and hold
to cycle through the digit from0-9.
Release to select the number and go to the
previous digit.
When both numbers are set right, release to retun to
the default screen.
3.
Press to cycle through A-H.
Release to select A-H.
Press 5 sec to reset the selected counter to 0.
4.
Press 5 sec to reset the counter to 0.
5.
Press 5 sec to reset the counter to 0.
6.
Keep holding while in this menu.
Press and hold
to cycle through the digit from 0-9.
Release to select the number.
Release to return the previous screen.
7-4
Diagrams and tables
W-H003.1403EN