Figure116.Adapterinstallation
Step5.Reconnectthecablestotheadapterthatyouremovedearlier.
Step6.ReinstallthePCIriser-cardassembly(see“ReplacingthePCIriser-cardassembly”onpage163).
Attention:Whenyouinstallanadapter,makesurethattheadapteriscorrectlyseatedinthePCI
riser-cardassemblyandthatthePCIriser-cardassemblyissecurelyseatedintheriser-card
connectoronthesystemboardbeforeyouturnontheserver.Anincorrectlyseatedadaptermight
causedamagetothesystemboard,thePCIriser-cardassembly,ortheadapter.
Step7.Reinstallthecover(see“Replacingthecover”onpage158).
Whattodonext
1.Installtheserverintotherackenclosureandpushtheserverintotherackuntilitclicksintoplace.
2.Reconnectthepowercordsandanycablesthatyouremoved.
3.Turnontheperipheraldevicesandtheserver.
Note:IftheserverisconfiguredforRAIDoperationthroughanoptionalServeRAIDadapter,youmighthave
toreconfigureyourdiskarraysafteryouinstallanadapter.SeetheServeRAIDdocumentationonthe
LenovoServerRAIDSupportCDforadditionalinformationaboutRAIDoperationandcompleteinstructions
forusingServeRAIDManager.
RemovinganLenovoServeRAIDSAS/SATAcontroller
UsethisinformationtoremoveanLenovoServeRAIDSAS/SATAcontroller.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage31.
Ifyouarereplacingaservercomponentintheserver,youneedtoslidetheserveroutfromtherack
enclosure,turnofftheserverandperipheraldevices,anddisconnectthepowercordsandallexternalcables.
Note:Forbrevity,inthisdocumentationtheLenovoServeRAIDSAS/SATAcontrollerisoftenreferredtoas
theSAS/SATAadapterortheServeRAIDadapter.
ToremoveanLenovoServeRAIDSAS/SATAcontroller,completethefollowingsteps.
Step1.Removethecover(see“Removingthecover”onpage157).
Step2.RemovethePCIriser-cardassembly(see“RemovingthePCIriser-cardassembly”onpage163).
Chapter6.Removingandreplacingservercomponents187