Lenovo ThinkSystem SE350 - Install the SIM Card

Step 4. Rotate the retainer cover down and slide it frontward to secure the SIM card.
Figure 130. SIM card removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the SIM card
Use this information to install the SIM card.
Before you install the SIM card, complete the following steps:
1. Read the following sections to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see “Power off the server” on
page 16
).
Note: To enable LTE, SIM card installation is required. LTE service is provided by authorized mobile service
carriers in respective countries or regions. Server must have a cellular plan from a service carrier to connect
to the LTE network.
To install the SIM card, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DkEpH4SzvKZck4f6rVRzUE
.
Step 1. Locate the SIM card position on the M.2 WLAN/LTE wireless adapter.
Step 2. Slide the retainer cover backward and rotate it up.
Step 3. Carefully place the SIM card on the slot.
122
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual