Lenovo ThinkSystem SE350 - TPM Card (for Chinese Mainland Only); Replacement; Remove the TPM Card; Only)

Figure 151. Top cover installation
Step 1. Align the posts inside the top cover with the slots on the chassis.
Step 2. Hold the front of the server and slide the top cover towards the front server until it clicks into place.
After you install the top cover, complete the following steps:
1. Reconnect power cords and all external cables.
2. Turn on the server (see
“Power on the server” on page 16).
TPM card (for Chinese Mainland only) replacement
Use this information to remove and install the TPM card (for Chinese Mainland only).
Remove the TPM card (for Chinese Mainland only)
Use this information to remove the TPM card (for Chinese Mainland only) .
Before you remove the the TPM card (for Chinese Mainland only) , complete the following steps:
1. Read the following sections to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 37
Chapter 3. Hardware replacement procedures 143