To remove the air baffle, complete the following steps:
Figure 35. Air baffle removal
Step 1. Lift the air baffle up and set it aside.
Attention: For proper cooling and airflow, reinstall the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the air baffle
Use this information to install the air baffle.
To avoid possible danger, read and follow the following safety statement.
• S012
CAUTION:
Hot surface nearby.
Before you install the air baffle, complete the following steps:
1. Read the following sections to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 37
Chapter 3. Hardware replacement procedures 51
To Next Page
Loading...
