Step 1. Grasp the M.2 wireless adapter at both ends and pull it straight up to remove it from the system
board.
Note: Carefully remove the adapter to avoid cable disconnected inappropriately from the adapter.
Figure 25. M.2 WLAN/LTE wireless adapter removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the M.2 WLAN/LTE wireless adapter
Use this information to install the M.2 WLAN/LTE wireless adapter.
Before you install the M.2 WLAN/LTE wireless adapter, complete the following steps:
1. Read the following sections to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see “Power off the server” on
page 16
).
To install the M.2 WLAN/LTE wireless adapter, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DkEpH4SzvKZck4f6rVRzUE
.
Notes:
• LTE and WLAN performance may vary depending on your configurations and environments.
42 ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
