Figure 73. M.2 LTE module removal
Step 5. Use screwdriver in the Misc kit to counterclockwise remove the nut and the washer on the rear of
the server.
Note: Apply the same method to remove both main and AUX cable.
Figure 74. M.2 LTE module removal
Table 26. M.2 LTE module removal
1 M.2 LTE module cable 3 Nut
2 Washer
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the M.2 LTE module
Use this information to install the M.2 LTE module.
Chapter 3. Hardware replacement procedures 85
To Next Page
Loading...
