Figure 71. M.2 LTE module removal
Step 3. Slide the cable holder out from the M.2 LTE module.
Figure 72. M.2 LTE module removal
Step 4. Use the screwdriver in the Misc kit to hook the cable as shown, and remove the cable from the M.2
LTE module. Apply the same method to the main cable and the AUX cable.
Note: Carefully to remove the cables, make sure the cable is removed vertically without excessive
force.
84
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
