Figure 138. System board removal
Step 9. Lift the system board toward the side of the server as shown to remove it from the server.
Figure 139. System board removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the system board assembly
Use this information to install the system board assembly.
Attention: Removing and installing this component requires trained technicians. Do no attempt to remove or
install it without proper training.
Before you install a system board, complete the following steps:
1. Read the following sections to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 37
128
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
