Lenovo ThinkSystem SE350 - LTE;WLAN Antenna Replacement; Remove a LTE;WLAN Antenna

Figure 64. Lock position switch installation
Step 3. Carefully route the cables as the following illustration and connect the connector.
Figure 65. Lock position switch cable
After you install the lock position switch, complete the following steps:
1. Reinstall the PCIe riser cage (see
“Install the PCIe riser assembly” on page 106).
2. Install the node if needed (see
“Install a node” on page 101).
3. Reconnect power cords and all external cables.
LTE/WLAN Antenna replacement
Follow this procedure to remove and install a LTE/WLAN Antenna.
Remove a LTE/WLAN Antenna
Use this information to remove a LTE/WLAN Antenna.
78
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual