Table 4. Components on the 10G SFP
+
LOM Package front view
1 Front operator panel
4 Shared XClarity Controller (XCC) network connectors
The wrench icon on the connector indicates that
this connector can be set to connect to Lenovo XClarity
Controller.
Attention: Only one network IP can be used.
2x RJ45 ports to support daisy-chain connection. The
dual-port provide the ability to daisy-chain the Ethernet
management connections thereby reducing the number
of ports in the management switches and reducing the
overall cable density needed for systems management.
With this feature, user can connect the first XCC
management port to the management network and the
second XCC management port to the next server
system.
2 USB 3.1 Gen 1 connectors 5 10Gb SFP
+
Ethernet connectors
3 1Gb Ethernet connectors 6 VGA connector
• Wireless enabled LOM Package
Figure 6. Wireless enabled LOM Package front view
Table 5. Components on the Wireless enabled LOM Package front view
1 Front operator panel
5 1Gb SFP connectors
2 USB 3.1 Gen 1 connectors 6 10Gb SFP
+
Ethernet connectors
3 1Gb Ethernet connectors 7 VGA connector
4 XClarity Controller (XCC) network connector
The wrench icon on the connector indicates that
this connector can be set to connect to Lenovo XClarity
Controller.
Install fillers
Install the fillers when the connectors are not used. The connectors could be damaged without proper
protection of the fillers.
Chapter 2. Server components 19
To Next Page
Loading...
