Figure 10. Rear view - -48V power distribution module (PDM)
Table 9. Rear view - -48V power adapter model
1 WLAN Antenna connectors (available only when M.2
WLAN module is installed)
5 Vin- terminal
2 RS-232 port (RJ-45)
6 Vin+ terminal
3 LTE Antenna connectors (available only when M.2 LTE
module is installed)
7 GND terminal
4 USB 2.0 connectors
8 Power connector
Install covers
Install the covers, or connectors could be damaged without proper protection of the covers.
Figure 11. Covers
Table 10. Covers
1 Antenna cover x4 (if no antennas are installed, use
antenna port filler, see
“Front view” on page 18)
2 Power adapter cover
22 ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
