• “Installation Guidelines” on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see “Power off the server” on
page 16
).
To install a M.2 data adapter, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DkEpH4SzvKZck4f6rVRzUE
.
Step 1. Align the M.2 data adapter with the slot on the riser card; then, carefully press the M.2 data adapter
straight into the slot until it is securely seated.
Step 2. Install the screw.
• M.2 riser assembly
Figure 30. M.2 data adapter installation
• PCIe and M.2 riser assembly
46
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
