Page 94
©2013 Technical Marine Service, Inc. LC-100 V2.97
Configuration Interface Map
The following pages are a map of the configuration interface. Use these maps to find your
way around the interface.
First a simple map is given as a general guide to the interface. This can be used as a quick
reminder for operators who already have experience configuring LevelCom 100s. Many
details are left out in this diagram to make it fit on a single page.
Following the simple map is a detailed map of the complete configuration interface. This
map is spread out over six pages so be careful in using it. Most of the main menu items are
documented on a single page.
On the first page of the detailed map is a key to the symbols used in the map. If you don’t
understand the symbols you should re-read the sections of this manual and refer to this map
as you read to get familiar with the layout of the map. Once you are familiar with the
configuration interface you should be able to get around quickly just using the map.
Generally to navigate the configuration interface you use the UP and DOWN arrow buttons to
move through the items in a single menu, you use the ENTER button to move one level into
the interface, and you use the ESCAPE button to move one level back. In the diagram this
corresponds to moving to the right using the ENTER button, and moving to the left using the
ESCAPE button.
To Next Page
Loading...