Lexmark MS510 - Exit Diags; Configuration Menu; Entering the Configuration Menu

• USB setup pkt info entries
• Supply event entries
To print the Event log:
From the Diagnostics menu, navigate to Event Log > Print Log.
Clear Log
Use this to remove all the current information in the Event log. This affects both the viewed log and the printed log
information.
To clear the event log:
1 From the Diagnostics menu, navigate to:
Event Log > Clear Log
2 Choose any of the following:
• Yes—To clear the Event log
• No—To exit the Clear log menu
Exit Diags
Select this to exit the Diagnostics menu. The printer performs a POR and restarts in normal mode.
In MS610de, this menu appears as a soft button at the bottom right corner of the display. This is always accessible to
the user from the main Diagnostics menu.
Configuration menu
The Configuration menu group consists of menus, settings, and operations that are used to configure a printer for
operation.
Entering the Configuration menu
1 Turn off the printer.
2 Press and hold 2 and 6 while turning on the printer.
Release the buttons when the splash screen appears.
4514-6xx
Service menus
145