Lexmark MS510 - Non-Lexmark [supply type], see User’s Guide [33.xy]

6 Release the latches (C) to remove the right cover.
B
C
Tray present sensor removal
1 Remove the right cover. See “Right cover removal” on page 194.
2 Disconnect the cable (A) from the tray present sensor.
3 Pry to remove the sensor retainer (B).
Note: The retainer is secured to the sensor by an adhesive.
4 Release the three latches (C), and then pry to remove the tray present sensor.
A
B
C
4514-6xx
Repair information
195