5 Click Import.
6 Repeat steps 3 to 5 for the other zip files that are included in the expanded zip file.
Updating the printer firmware
Warning—Potential Damage: Before updating the printer firmware, ask the next level of support for the correct
code. Using an incorrect code level may damage the printer.
The printer must be in ready state in order to update the firmware.
Using a flash drive
This option is available only in printer models with front USB port.
Make sure to enable the Enable Drive and Update Code settings. You can find the settings in the Flash drive menu under
the Settings menu.
1 Insert the flash drive into the USB port.
2 From the home screen, navigate to USB Menu: Print from USB > Accept or OK.
3 Select the file that you need to flash.
Note: Do not turn off the printer while the update is going on.
4514-6xx
Repair information
162
To Next Page
Loading...
