Restoring the printer configuration after replacing the controller board
Restore the printer to its correct configuration to complete the replacement service. Use the Service Restore Tool to
download the software bundle, and then flash the printer settings and Embedded Solutions.
Note: The software bundle contains the latest version of the firmware, applications, and software licenses from the
Lexmark Virtual Solutions Center (VSC). The printer firmware may be at a different level from what was used before
replacing the controller board.
Using the Service Restore Tool
1
Go to https://cdp.lexmark.com/service-restore-tool/ to access the tool.
2 Log in using your Lexmark or partner login.
If your login fails, then contact your next level of support.
3 Enter the printer serial number, and then submit the information.
Note: Make sure that the serial number that appears on the verification screen is correct.
4 Save the zip file.
4514-6xx
Repair information
159
To Next Page
Loading...
