network SE menu
accessing 155
Non‑Lexmark [supply type], see User’s Guide
[33.xy] 81
Not enough free space in flash memory for resources
[52] 81
notices 2, 303
O
options
firmware cards 307
media handling options 307
memory cards 307
output bin tests
feed tests 138
sensor test 138
P
paper
characteristics 25
letterhead 27
preprinted forms 27
recycled 27
selecting 27
storing 27
unacceptable 26
paper jams
avoiding 44
paper jams, clearing
behind rear door 56
in duplex area 59
in front door 47
in manual feeder 72
in standard bin 55
in tray 1 62
in tray [x] 66
paper messages
[x]‑page jam, remove tray 1 to clear duplex.
[23y.xx] 59
paper sizes
supported by the printer 30
paper types
duplex support 31
supported by printer 31
where to load 31
parts catalog legend 282
POR sequence 35
power‑on reset sequence 35
print quality
initial check 36
print quality troubleshooting
blank pages 37
gray background on prints 36
repeating defects 39
shadow images appear on prints 39
skewed print 40
solid black pages 38
streaked vertical lines appear on prints 42
toner rubs off 42
toner specks appear on prints 43
printer control panel
indicator light 130
Sleep button light 130
Printer had to restart. Last job may be incomplete. 81
printer messages
[x]‑page jam, clear manual feeder. [25y.xx] 72
[x]‑page jam, clear standard bin. [20y.xx] 55
[x]‑page jam, open front door. [20y.xx] 47
[x]‑page jam, open rear door. [20y.xx] 56
[x]‑page jam, open tray 1. [241.xx] 62
[x]‑page jam, open tray [x]. [24y.xx] 66
Cartridge low [88.xy] 74
Cartridge nearly low [88.xy] 74
Cartridge very low, [x] estimated pages remain
[88.xy] 74
Cartridge, imaging unit mismatch [41.xy] 74
Change [paper source] to [custom string] load [paper
orientation] 75
Change [paper source] to [custom type name] load
[orientation] 74
Change [paper source] to [paper size] load
[orientation] 75
Change [paper source] to [paper type] [paper size]
load [orientation] 75
Close front door 75
Complex page, some data may not have printed
[39] 75
Configuration change, some held jobs were not
restored [57] 75
Defective flash detected [51] 76
Error reading USB drive. Remove USB. 76
Error reading USB hub. Remove hub. 76
Imaging unit low [84.xy] 76
Imaging unit nearly low [84.xy] 76
Imaging unit very low, [x] estimated pages remain
[84.xy] 76
Incorrect paper size, open [paper source] [34] 77
Insert Tray [x] 77
Insufficient memory for Flash Memory Defragment
operation [37] 77
Insufficient memory to collate job [37] 77
4514-6xx
Index
326
To Next Page
Loading...
