Lexmark MX310 Series - Page 403

ADF paper jam service check 134
ADF streak service check 134
black or blank page copy service check 130
blank pages 39
CCD service check 131
fax reception service check 139
fax transmission service check 141
flatbed home position service check 132
flatbed motor service check 131
gray background on prints 38
modem/fax card service check 138
repeating defects 39
shadow images appear on prints 40
skewed print 41
solid black pages 40
streaked vertical lines appear on prints 43
toner rubs off 44
toner specks appear on prints 45
printer
basic model 339
fully configured 339
printer configurations 339
printer control panel
indicator light 150, 151
Sleep button light 150, 151
using 149, 150
Printer had to restart. Last job may be incomplete. 85
printer messages
[x]‑page jam, clear manual feeder. [25y.xx] 71
[x]‑page jam, clear standard bin. [20y.xx] 57
[x]‑page jam, open automatic feeder top cover.
[28y.xx] 74
[x]‑page jam, open front door. [20y.xx] 48
[x]‑page jam, open rear door. [20y.xx] 56
[x]‑page jam, open tray [x]. [24y.xx] 62
Cartridge low [88.xy] 76
Cartridge nearly low [88.xy] 76
Cartridge very low, [x] estimated pages remain
[88.xy] 76
Change [paper source] to [custom string] load [paper
orientation] 76
Change [paper source] to [custom type name] load
[orientation] 76
Change [paper source] to [paper size] load
[orientation] 77
Change [paper source] to [paper type] [paper size]
load [orientation] 77
Close door 77
Close flatbed cover and load originals if restarting job
[2yy.xx] 77
Complex page, some data may not have printed
[39] 78
Configuration change, some held jobs were not
restored [57] 77
Defective flash detected [51] 78
Disk must be formatted for use in this device 78
Error reading USB drive. Remove USB. 78
Error reading USB hub. Remove hub. 78
Fax partition inoperative. Contact system
administrator. 78
Fax server 'To Format' not set up. Contact system
administrator. 79
Fax Station Name not set up. Contact system
administrator. 79
Fax Station Number not set up. Contact system
administrator. 79
Imaging unit low [84.xy] 79
Imaging unit nearly low [84.xy] 79
Imaging unit very low, [x] estimated pages remain
[84.xy] 79
Incorrect paper size, open [paper source] [34] 80
Insufficient memory for Flash Memory Defragment
operation [37] 80
Insufficient memory to collate job [37] 80
Insufficient memory to support Resource Save feature
[35] 81
Insufficient memory, some Held Jobs were deleted
[37] 80
Insufficient memory, some held jobs will not be
restored [37] 80
Load [paper source] with [custom string] [paper
orientation] 82
Load [paper source] with [custom type name] [paper
orientation] 82
Load [paper source] with [paper size] [paper
orientation] 82
Load [paper source] with [paper type] [paper size]
[paper orientation] 83
Load manual feeder with [custom string] [paper
orientation] 81
Load manual feeder with [custom type name] [paper
orientation] 81
Load manual feeder with [paper size] [paper
orientation] 81
Load manual feeder with [paper type] [paper size]
[paper orientation] 82
Maintenance kit low [80.xy] 83
Maintenance kit nearly low [80.xy] 83
Maintenance kit very low, [x] estimated pages remain
[80.xy] 83
Memory full [38] 83
Memory full, cannot print faxes 83
Memory full, cannot send faxes 84
Network [x] software error [54] 84
7015
Index
403