Lexmark MX310 Series - Page 404

No analog phone line connected to modem, fax is
disabled. 84
Non‑Lexmark [supply type], see User’s Guide
[33.xy] 84
Not enough free space in flash memory for resources
[52] 85
Printer had to restart. Last job may be incomplete. 85
Reinstall defective cartridge [31.xy] 85
Reinstall missing or unresponsive cartridge [31.xy] 85
Reinstall missing or unresponsive imaging unit
[31.xy] 87
Remove paper from standard output bin 85
Replace all originals if restarting job. 85
Replace cartridge, 0 estimated pages remain
[88.xy] 86
Replace cartridge, printer region mismatch [42.xy] 86
Replace defective imaging unit [31.xy] 86
Replace imaging unit, 0 estimated pages remain
[84.xy] 87
Replace jammed originals if restarting job. 87
Replace maintenance kit, 0 estimated pages remain
[80.xy] 87
Replace unsupported cartridge [32.xy] 87
Replace unsupported imaging unit [32.xy] 88
Restore held jobs? 88
Scanner automatic feeder cover open 88
Scanner disabled by admin [840.01] 88
Scanner disabled. Contact system administrator if
problem persists. [840.02] 88
Scanner jam, remove all originals from the scanner
[2yy.xx] 88
Scanner jam, remove jammed originals from the
scanner [2yy.xx] 88
Serial option [x] error [54] 89
SMTP server not set up. Contact system
administrator. 89, 90
Some held jobs were not restored 89
Standard network software error [54] 89
Standard USB port disabled [56] 89
Supply needed to complete job 90
Too many flash options installed [58] 90
Too many trays attached [58] 90
Unformatted flash detected [53] 90
Unsupported USB hub, please remove 78
printer setup
defaults 164
edge to edge 165
permanent page count 165
printed page count 165
printhead adjustment 309
R
recovery mode
accessing 186
recycled paper
using 28
registration 155
Reinstall defective cartridge [31.xy] 85
Reinstall missing or unresponsive cartridge [31.xy] 85
Reinstall missing or unresponsive imaging unit
[31.xy] 87
removal procedures
tips 209
removals
ACM assembly 288, 294
ACM assembly, option tray 335
ACM clutch 219
adf cable 325
adf input tray 316
ADF left hinge 328
ADF separator pad 311
ADF separator roll 312
ADF top cover assembly 323
adf unit 316
bail 264
bin extender 308
cartridge gearbox 224
cartridge plunger 244
cave light cable 331
control panel assembly 249
control panel cover 255
control panel ribbon cable 328
controller board 231
controller board shield 234
cooling fan 230
display 256, 258
duplex 274
duplex gear assembly 224
duplex sensor 278
duplex sensor and input sensor 275
dust cover 300
flatbed assembly 328
flatbed cushion 314
front access cover 265
front access sensor 267
front bin cover 248
front input guide 267
fuser 305
index sensor 279
input sensor 278
jam access cover 264
keypad assembly 260
7015
Index
404