2-32 Service Manual
7526
290.02 Scanner ADF feed jam. • Remove all media present in the media path.
• Check for obstructions in the media path.
• If the problem persists, go to “290.01, 290.02—
Scanner ADF pickup/feed jam service check”
on page 2-95
290.10 Scanner static jam—scanning sensor. • Remove all media present in media path.
• Check ADF scanning sensor for proper
operation. Go to “ADF scanning sensor
service check” on page 2-141.
291.00 Scanner static jam—jam sensor. • Remove all media present in media path.
• Check ADF jam sensor for proper operation. Go
to “ADF jam sensor service check” on
page 2-139.
291.01 ADF scanning sensor jam.
Possible cause is sensor never made.
• Remove all media present in the media path.
• Check for obstructions in the media path.
• Check the ADF jam sensor for proper operation.
Go to “ADF jam sensor service check” on
page 2-139.
291.02 ADF jam sensor jam. Go to “ADF jam sensor service check” on
page 2-139.
292.00 Scanner ADF cover open jam.
Possible causes:
• ADF cover sensor flag
• ADF cover sensor
• ADF improper grounding of the
feed shaft to skew shaft or feed
shaft to ADF upper cover.
• Remove all media present in the media path.
• Check ADF left door interlock sensor for proper
operation. Go to “292.00—Scanner ADF cover
open jam service check” on page 2-96.
293.00 Paper missing. • Remove all media present in the media path.
• Check the ADF input sensor for proper
operation. Go to “ADF input sensor service
check” on page 2-138.
293.02 Flatbed cover open. • Remove all media present in the media path.
• Check the ADF closed interlock switch for
proper operation. Go to “293.02—Flatbed
cover open jam service check” on page 2-99.
294.00 Scanner static jam—ADF exit sensor. • Remove all media present in the media path.
• Check the ADF media exit sensor for proper
operation. Go to “ADF exit sensor service
check” on page 2-137.
294.01 Scanner ADF eject jam. • Remove all media present in the media path.
• Check for obstructions in the media path.
• Check the sensor (ADF media exit) for proper
operation. Go to “ADF exit sensor service
check” on page 2-137.
Error code Description Action
To Next Page
Loading...
