3-4 Service Manual
7510
PRINT TESTS
See “PRINT TESTS” on page 3-7.
Tray 1
Tray 2
Tray 3
Tray 4
MP Feeder
Printing Quality Test Pages
See “Print Quality Test Pages” on page 3-7.
HARDWARE TESTS
Panel Test
See “Panel Test” on page 3-8.
Button Test
See “Button Test” on page 3-8.
DRAM Test
See “DRAM Test” on page 3-9.
CACHE Test
See “CACHE Test” on page 3-9.
DUPLEX TESTS
Quick Test See “Quick Test” on page 3-9.
Sensor Test See “Sensor Test (duplex)” on page 3-10.
INPUT TRAY TESTS
Feed Tests See “Feed Tests” on page 3-10.
Sensor Test See “Sensor Test (input tray)” on page 3-11.
OUTPUT BIN TESTS
Feed to All Bins See “Feed Tests (output bins)” on page 3-11.
Feed Tests See “Feed To All Bins” on page 3-12.
Sensor Tests See “Sensor Test (output bin)” on page 3-12.
FINISHER TESTS
Staple Test See “Staple Test” on page 3-12.
Hole Punch Test See “Hole Punch Test” on page 3-13.
Feed Tests See “Feed Tests (Finisher)” on page 3-13.
Sensor Tests See “Sensor Test (Finisher)” on page 3-13.
BASE SENSOR TESTS See “BASE SENSOR TEST” on page 3-15.
Cover and Door
Devices
Exit Level
Media Path
Transfer Belt
DEVISE TESTS See “DEVICE TESTS” on page 3-16.
Quick Disk Test
Disk Test/Clean
PRINTER SETUP
Defaults See “Defaults” on page 3-18.
Prt Color Pg Count See “Printed Color Page Count” on page 3-18.
Prt Mono Pg Count See “Printed Mono Page Count” on page 3-19.
Perm Page Count See “Permanent Page Count” on page 3-19.
Serial Number See “Serial Number” on page 3-19.
Engine Setting 1 to 4 See “Engine Setting 1 to 4” on page 3-19.
To Next Page
Loading...
