Installation/Owner's Manual
6-4
3. Enter the name of the group to create and press the [OK] button.
4. Check whether the applicable operating group has been created for the ʻGroup nameʼ. Now select
the unit to include in the newly created group from the unregistered unit list, and press the [◀]
button to move to the registered unit list.
After entering the group name,
press the [OK] button
[Click on [After selecting the unit from the list of
unregistered unit, press the [◀] button to
include the unit to the applicable groupSave]
button to apply to system
Check whether the group
is created
6. Auto control menu
To Next Page
Loading...
Need help?
General
