Installation/Owner's Manual
9-33
4. Press the [▶] button, to add the designated group to 'Registered unit'. The applicable unit will be
moved and displayed in the 'Registered unit' list.
Press the [▶] to move the
designated unit. Applicable
unit will be displayed in the
"Registered unit".
5. Click on the [Save] button to save the current setting. Message confirming to save will be displayed
on screen. Click on the [Yes] button.
After clicking the [Save] button, When
the "Information" screen is displayed,
click on the [Yes] button
9. System Menu
To Next Page
Loading...
