AC Smart
2-21
2. AC Smart II Installation
4. The process to search for and register the indoor unit and the ventilator connected to the AC Smart
II proceeds. When this process is finished, the registered unit is added and displayed at the table
located at the bottom of the screen.
5. Temporarily store the searched unit. When you press [OK] button, the ʻConfirmʼ screen for
confirming saving is displayed. When you press ʻYesʼ button, saving is done and it returns to the
previous screen.
After the device search,
the result will be
displayed.
To apply to system
click on [OK] button,
'When the
'Information' screen
is displayed click on
[Yes] button
To Next Page
Loading...
Need help?
General
