Installation/Owner's Manual
2-22
2. AC Smart II Installation
6. Finally, the temporarily saved unit setting should be registered to the system.
When [Save] button is pressed, ʻInformationʼ screen to check whether to apply the current setting to
the system is displayed. Press [Yes] button.
7. Current setting will be applied to the system and the message saying that the setting has been
saved will be displayed. Click on the [OK] button to complete the registration.
To apply to system, click on [Save]
button click on [Yes] button
When it is saved, click on [OK] button
Reference: Change information of registered unit
When you want to change the information of the registered unit such as name, or form a group with
the units, refer to the ʻSettingʼ section on page 8-1.
To Next Page
Loading...
