4 Operation
Working under load
•
loads involving a large centre of gravity
distance
•
Before transporting loads in a wind force of
6 and upwards
Example
Load centre of gravity distance: 650 mm
Load height to be lifted: 6800 mm
¾ Traceaverticallinefroma
load distance of
650 mm to its point of inters
ection with the
line for a lift height of 680
0mm.
¾ Read the max. permissible load to the left of
the point of intersection with the horizontal
line.
The maximum load in this example is 2100 kg.
Use the same procedure fo
r other lift heights
and centre of gravity dis
tances. The deter-
mined values refer to bot
h fork arms and
evenly distributed load
s.
Wheel-slide protecti
on chains
CAUTION
Mounting wheel-slide protection chains alters the
wheel freedom and the load capacity of the truck
Before wheel-slide protection chains are mounted,
thestandardforkcarriagemustbereplacedwitha
special fork carriage that is installed 40 mm further
forward. All residual load capacity specifications
in the basic load capacity diagram and on the
additional capacity rating plate must be reduced
by 100 kg. This reduction in load capacity is still
necessary even if wheel-slide protection chains are
not fitted.
92 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
