Maintenance 5
Inspection and maintenance overview
1000hserviceplan
At operating hours
1000 2000 4000 5000 7000
8000 10000 11000 13000 14000
Carried
out
16000 17000 19000 20000
9
8
Information on service plan
Dependent on the consumables used, the driving style and the operating conditions,
but at least every 12 months. Refer also to the recommendation for consumables.
Preparations
Clean the truck (if necessary)
Read out error memory and delete
Calibrate the drive potentiometer and joysticks
Enter the next maintenance interval
Engine
Renew the engine oil
Change the engine oil filters
Change the fuel filter
Check condition and secure positioning of engine support and engine mount
Check condit
ion of V-ribbed belt
Check condi
tion and tension of toothed belt
Clean water cooler and hydraulic oil cooler
Check cool
ant concentration
Change air filter cartridge, check vacuum-operated switch
Change the breather filter for charge air regulation
Clean th
eoilbathairfilter
Check i
ntake and exhaust pipes for leaks
Check the particle filter system
Clean the pressure control device at the changing particle filter
Clean the water trap at the changing particle filter
Gear
box
Axle clamps and wheel motors: check the mountings
Drive axle: check the side stops
Chassis, bodywork and fittings
Operating Instructions – 394 807 10 01 EN – 07/2011 109
To Next Page
Loading...
