Linde H50D - Topping up the Washer System Water Tank (Special Equipment)

Maintenance 5
Chassis, bodywork and fittings
• Seat guide
• Bonnet pivot pin
• Wiper mounting (option)
• Cab door hinges and locks (option)
• Grease the bonnet latch.
Topping up the washer system water
tank (special equipment)
¾ Open the bonnet.
¾ Remove the filler cap (1) fr
om the water
tank (2) at the right-hand
side of the engine
compartment.
¾ Fill up with water until it is visible in the filling
neck.
¾ Close the filler cap (1).
¾ Close the bonnet.
Operating Instructions – 394 807 10 01 EN – 07/2011 163