4 Operation
Working under load
Setting down loads
DANGER
Never stop and leave the vehicle with the load still
raised.
Let down the fork carriage until the fork arms touch
the ground.
¾ Carefully move the forklift truck to the load /
storage area.
¾ Lift the fork carriage to the necessary height.
¾ Position the lift mast vertically (load hori-
zontal).
¾ Observe the lift mast positioning identifi-
cation symbol (1) on the display unit if the
truck is equipped with automatic lift mast
positioning.
¾ Carefully move the load over the load /
storage area.
¾ Carefully lower the load until the fork arms
are clear.
¾ Back the forklift truck away.
Tow coupling
NOTE
The towing device is only used to tow light
trolleys on the factory premises. The national
regulations for the use of unbraked trailers on
industrial trucks must be observed.
96 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
