5 Maintenance
Chassis, bodywork and fittings
¾ Remove the cover (1).
¾ Remove the filter (2) and clean or replace.
¾ Reinsert the filter and fit the co
ver.
¾ Unscrew the screws (4).
¾ Remove the air duct (3).
¾ Remove the filter (5) and cle
an or replace.
¾ Reinsert the filter and attach the air duct
with screws.
Servicing the air conditioning
The following maintenance work must be
carried out at the beginning, middle and end of
a season:
¾ Clean the condenser (6).
The condenser fins must be cleaned gently
without any high pressure being applied.
Otherwise, they will be damaged and impair
the air flow.
¾ Check the belt tension on the compressor,
and check for good condition.
NOTE
Specialist knowledge and special tools are
required for carrying out further maintenance
work. Please contact your authorised dealer.
Checking the condition and correct
function of the seat belt
DANGER
Risk of accident or danger to life if the restraint
system is faulty
Do not operate the industrial truck if the restraint
system is faulty.
160 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
