EasyManua.ls Logo

Linde H50D - Driving (Single-Pedal Operation)

Linde H50D
310 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation 4
Standard equipment
Driving (single-pedal operation)
WARNING
It is generally not permitted to drive on long gra-
dients over 15% due to specified minimum braking
and stability values. Please contact your authori-
sed dealer before driving on larger gradients. The
climbing capability values given in the type sheet
have been determined from the pulling force and
only apply when overcoming obstacles on the road-
way and for small height differences.
You should always adapt your driving to the conditi-
ons of the route used (unevenness etc.), especially
hazardous work areas and your load.
WARNING
When using mirrors, remember that the rear-view
mirror is only designed for monitoring the area
behind the vehicle.
Reverse travel is therefore only permitted when
looking directly behind you.
CAUTION
Any side doors attached must be protected from
damage when driving.
Please therefore ensure that both side doors are
closed and locked before setting off.
NOTE
The forklift truck can only be driven with the
driver’s seat under load.
¾ Start the engine.
¾ Slightly raise fork arms and tilt lift mast back.
Operating Instructions 394 807 10 01 EN 07/2011 53

Table of Contents

Related product manuals