4 Operation
Standard equipment
¾ Release the parking brake (unlock the park-
ing brake lever (1) and move it downwards
as far as the stop).
Forwards travel
¾ Move the direction of travel lever (4) for-
wards.
¾ Press the accelerator peda
l(3)carefully.
The driving speed of the truck increases as the
actuation distance of the pedal increases.
NOTE
Pressing down the accelerator pedal hard is
to no advantage as the maximum acceleration
rate is controlled automatically.
Reverse travel
¾ Move the direction of t
ravel lever (4) back-
wards.
¾ Press the accelerator pedal (3) carefully.
The truck will reverse slowly or quickly de-
pending on the accelerator pedal position.
Changing direction of travel
¾ Release accelerat
or pedal.
The hydrostatic drive will act as a service
brake.
¾ Operate direction selection lever (4) for the
opposite drive direction.
The forklift truc
k will now accelerate in the
specified directi
on.
The direction selection lever can be switched
over directly. The hydrostatic drive brakes
the truck until it comes to a standstill and then
accelerates in the opposite drive direction.
54 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
