4 Operation
Standard equipment
Adjusting the steering column
DANGER
Safe driving is not guaranteed with the clamping
screw open.
Only adjust the steering column when the vehicle is
stationary.
Angle adjustment
¾ Undo the clamping screw (2) anticlockwise.
¾ Move the steering wheel (1) into the re-
quired position.
¾ Tighten the clamping screw (2) clockwise.
Height adjustment (special equipment)
¾ Undo the clamping screw (2) anticlockwise.
¾ Move the steering wheel (1) into the re-
quired position by pulling it upwards or
pushing it downwards.
¾ Tighten the clamping screw (2) clockwise.
Setting the clock
NOTE
The time is displayed in 24-hour format. It is
possible to change to 12-hour format using
the diagnostic device. Please contact your
authorised dealer.
40 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
