Operation 4
Working under load
¾ Setliftmasttovertical.
¾ Lift or lower the fork carriage to the neces-
sary height.
¾ Carefully steer the truck fork
s beneath the
centre of the load to be taken up
, where
possible so the load touches th
e fork back,
taking account of adjacent l
oads.
¾ Lift fork carriage until the load is no longer in
contact with the supporting surface.
¾ Reverse the truck until the load is free.
¾ Tilt the lift mast backward
s.
Travelling with l
oad
NOTE
When transporting cargo, the sender must
ensure that the goods are safely loaded for
transportation and secured if necessary.
Please therefore make sure that goods are
properly stacked and there is no damage
to packaging, pallets etc. The carrier must
ensure safe loading.
d3921431
¾ Do not transport loads if they are shifted to
the side (e.g. with sideshift).
¾ Transport loa
ds close to the floor.
¾ On ascending/descending routes, always
travel with the load facing uphill; never travel
diagonally or turn around.
¾ If visibility is poor, instructions should be
provided by a second person.
¾ If the load to
be transported is stacked so
high as to obs
truct visibility in the direction
of travel, th
etruckmustonlybedrivenin
reverse.
Operating Instructions – 394 807 10 01 EN – 07/2011 95
To Next Page
Loading...
