Maintenance 5
Chassis, bodywork and fittings
NOTE
For safety reasons, check the r
estraint system
regularly (once a month) for fu
nction and good
condition.
Screw connections should be checked regu-
larly to make sure that they are secure.
The seat belt must be replaced after an
accident.
The driver’s seat and the dr
iver’s seat mount-
ingmustalsobecheckedaft
er an accident by
authorised technicians.
If you notice any irregularities in the function-
ing of the seat (e.g. seat suspension) or the
seat belt, contact your authorised dealer im-
mediately to eliminate the cause.
NOTE
In extreme conditions,
the restraint system
must be checked for corr
ect function and
perfect condition dai
ly prior to the truck being
commissioned.
¾ Pull belt (1) right out and check for fraying
and torn stitching.
¾ Check that the buckle (3) functions correctly
and that the belt retracts properly.
¾ Check the covers and
attachment points for
damage.
Check the automatic lock.
¾ Park the truck on level ground.
¾ Jerk out the belt.
The automatic mechanism should block
extension of the belt from the belt retractor
(2).
¾ Slide the seat fully forward.
¾ Tilt the backrest
fully forward.
NOTE
When opening the bonnet, watch out for a
possibly installed rear windscreen.
Operating Instructions – 394 807 10 01 EN – 07/2011 161
To Next Page
Loading...
