Linde H50D - Page 221

Technical data 6
Type sheet H 40, as at 07/2011
4 Basic dimensions
4.4
Lift
h
3
[mm]
3000
4.5
Raised mast height h
4
[mm]
3795
4.7
Overhead guard height (cab) h
6
[mm]
2383
4.8
Seat height, min./max. h
7
[mm]
1226
4.12
Coupling height h
10
[mm]
703
4.19
Total length l
1
[mm]
3984
4.20
Length including fork back l
2
[mm]
2984
4.21 Total width
b
1
/b
2
[mm]
1446/1423
5
4.22 Fork arm dimensions
s/e/l [mm]
50 x 120 x 1000
4.23
Fork carriage DIN 15173, class/form A, B
3A
4.24
Fork carriage width b
3
[mm]
1350
6
4.31
Ground clearance at mast
m
1
[mm]
158
4.32
Ground clearance at centre of wheelbase
m
2
[mm]
201
4.33
Aisle width for pallet 1000 x 1200 crosswise
A
st
[mm]
4355
4.34
Aisle width for pallet 800 x 1200 longitudinal A
st
[mm]
4555
4.35
Turning radius W
a
[mm]
2672
4.36
Smallest pivot point distance
b
13
[mm]
700
5Performanced
ata
5.1
Driving speed with/without load
km/h 21/21
5.2
Lifting speed with/without load
m/s 0.53/0.57
5.3
Lowering speed with/without load
m/s 0.52/0.57
5.5
Pulling force with/without load
N 28541/20570
5.7
Climbing capability with/without load
%
29.0/34.0
5.9 Acceleration with/without load
s
5.5/4.8
5.10
Service b
rake
Hydrostatic
7Drive/engine
7.1
Engine man
ufacturer/model
VW/CBJB
7.2
Engine pow
er rating as per ISO 1585
kW
55
5
T
he total width may deviate from the indicated value, depending on the tyre variant and fork carriage variant.
6
The fork carriage width may deviate from the indicated value, depending on the fork carriage variant.
Operating Instructions – 394 807 10 01 EN – 07/2011 209