4 Operation
Special equipment
NOTE
If you only notice one of these s
tatuses (such
as a problem with driving) afte
r you have input
the status code
0
(truck OK), you
have to log
off.
¾ Rotate the turning knob (6) anticlockwise to
the stop.
¾ Log in again with status message
3
(prob-
lem with driving)
Truck data acquis
ition — standard
setting (PIN and
status code)
Logging on and starting the truck:
¾ Apply the parking brake.
¾ Flip up the armr
est support (4) on the side
to the right via
opening (5).
82 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
