Loadrite PRO - Weighing Procedures; Adding a Load

LOADRITE PRO OPERATING MANUAL
13
4 Weighing Procedures
Adding a Load
This function adds the lifted weight to the short and long totals for the
current product.
To Add a load
(Weights shown are examples only)
Before the load is lifted:
(Current total 5600)
Ready
Sand
5600
Raise the load smoothly past the trigger
point.
The Loadrite beeps and displays the load.
(Weight of load 2200)
Sand
5600
2200
Press .
The Loadrite updates the total and returns
to the Ready state.
(New total 7800)
Ready
Sand
7800
The Loadrite has an option to use a remote add button. If fitted, the remote
add button is normally mounted on the lift lever.
In Target mode, the display is different. For details, see Target Mode on
page 32.