Loadrite PRO - Mix Mode; Example

LOADRITE PRO OPERATING MANUAL
42
9 Mix Mode
Mix mode is similar to Batch mode except that target value for the mix is not
required. You load the first product to a certain amount. When you change
to the next product, the Loadrite will work out exactly what you need to load
based on the predefined recipe.
The recipe can contain up to ten products. It specifies the relative amount of
each product in a batch.
When in Mix mode, the Loadrite displays the word Mix to indicate that you
are in Mix mode and loading the primary product. When you change to
other product in the recipe, the Loadrite displays To Load value for the
product.
Example
Suppose that a recipe of three products has been entered as follows:
Product Proportion
Sand
* First item in the recipe is
the primary product.
4
Gravel 2
Pumice 1
Suppose that you have loaded 4000 kg of the primary product sand. The
Loadrite automatically calculates the amount of other product required,
which in this case would be:
Sand 4000kg
Gravel 2000kg
Pumice 1000kg
As you weigh and load the products, the Loadrite maintains the To Load
amount for each product in a similar way to target mode. You can change
from one product to another at any time during weighing in order to mix the
products.