LOADRITE PRO OPERATING MANUAL
57
Setup
The Setup option enables you to access special functions such as span
calibration. You need a security code to access these functions.
To access the Setup options:
1. Press
M N O
.
2. Use
5
6
to scroll to Setup.
3. Press
to select.
4. The Loadrite prompts you to enter an access code. For special
functions, key in your security code and press
.
Clock Setting (Clock)
Clock Setting editing is an optional function that is selected during
installation. Once enabled, you have access to change the Loadrite internal
clock (date/time) setting.
To set the time and date – refer to page 78.
Changing Scale Number (Scale#)
This function enables different load bearing implements to be used by the
vehicle. It is available only if the multiple scale feature has been enabled
during installation, e.g. bucket or forks. Both should be assigned a number.
Once enabled, the operator needs to select the correct scale for the
attached implement. The Loadrite has two scales.
To change the scale
1. Press
M N O
.
2. Use
5
6
to scroll to Scale#.
3. Press to select.
4. Use
5
6
to scroll to the desired scale number, then press .
It is important to check zero before continuing (page 15).
To Next Page
Loading...