Loadrite PRO - Tip Off; Truck Tip-Off

LOADRITE PRO OPERATING MANUAL
52
12 Tip Off
This feature allows you to load a truck to an exact value by using only part
of the last bucketful.
There are two different methods, depending on the way the Loadrite has
been set up:
• Truck tip-off, or
• Stock Pile tip-off.
Truck Tip-Off
Using this method, you tip a measured amount of product from the bucket
into the truck and dump the rest. The following example illustrates the
weigh screen shots when in Total mode or Target mode.
EXAMPLE TOTAL MODE TARGET MODE
Target weight = 6000kg
Current weight = 5600kg
Weight needed = 400kg
Ready
Sand
5600
To Load
Sand
400
Lift the load in the normal way.
The Loadrite displays the lifted
weight (2200kg)
Lift the bucket to a suitable
height over the truck.
Sand
5600
2200
Sand
400
2200
Press . The Tip-Off
indicator light comes on.
Tipoff
Wait...
2200
Tipoff
Wait...
2200