LOADRITE PRO OPERATING MANUAL
58
Clear All Long Totals (ClearAll)
This function clears all the long totals to zero.
To clear all the long totals – refer to page 20.
Auto Add On/Off Setting (Auto Add)
Auto Add is an optional feature that is selected during installation. If Auto-
Add is enabled, the Loadrite can automatically operate the ADD function
every time a load is lifted past the trigger point.
To turn on/off auto add function
1. Press
M N O
. The time is displayed.
2. Use
5
6
to scroll to Auto Add.
3. Press to select.
4. Use
5
6
to adjust the setting.
5. Press to accept the setting.
Rotary Trigger Position Screen (TrigScrn)
This function displays a bar graph that reflects the current position of the
rotary trigger. It is available only if the rotary trigger is installed.
>>>>---+
Sand
0
Bar graph
+ trigger point,
>>> current bucket
position from ground
--- distance away from
trigger point
To turn on/off rotary trigger position screen
1. Press
M N O
.
2. Use
5
6
to scroll to TrigScrn.
3. Press to select.
4. Use
5
6
to adjust the setting.
To Next Page
Loading...
