LOADRITE PRO OPERATING MANUAL
14
Auto Add
Auto Add is an optional feature that is selected during installation. If Auto
Add is enabled, the Loadrite can automatically operate the ADD function
every time a load is lifted past the trigger point.
The Auto Add indicator light illuminates
when the Loadrite is in Auto-Add mode.
Ready
Sand
5600
To turn on/off auto add function
1. Press
M N O
to access user menu.
2. Use
5
6
to scroll to Auto Add.
3. Press to select.
4. Use
5
6
to adjust the setting.
5. Press to accept the setting.
If Auto Add is on:
• The procedure for zeroing is different. See page 17.
Subtracting a Load
This function can be useful when only part of a final bucket load of loose
material is required. You can add the full bucket load and then re-weigh
and subtract the amount remaining in the bucket.
Another example is when a log has been added and then removed from a
truck.
To Next Page
Loading...
