Loadrite PRO - Self Test (Selftest); Uplink (Uplink)

LOADRITE PRO OPERATING MANUAL
61
To clear an existing customer name
1. Use
5 6
to scroll to the name.
2. Press .
3. You will see the name disappear.
4. Press to confirm the CLEAR operation.
5. Press any other key to abort.
Alarm Clock On/Off
This option turns the alarm clock on or off. The alarm clock will alert when
the Loadrite in either Ready or Standby mode. The alarm clock will not alert
if the Loadrite is powered off.
When the alarm time is reached
The Loadrite sounds an alert tone, Alarm Clock is displayed and all
indicator lights flash. Press any key to stop the alarm. The alarm will stop
after a few seconds.
To turn on/off the alarm clock
1. Press
M N O
.
2. Use
5 6
to scroll to Alarm On/Off.
3. Press
to select.
4. Use
5 6
to scroll to the desired mode, then press .
Alarm Time Set
This option allows you to change the alarm time.
To turn on/off the alarm clock
1. Press
M N O
.
2. Use
5 6
to scroll to Alarm On/Off.
3. Press to select.
4. Use
5 6
to scroll to the desired mode, then press .