LOADRITE PRO OPERATING MANUAL
60
Data List (DataList)
If the Data function is enabled and Data1 is configured to work with
alphanumeric data, this function will appear in the menu.
The Data List function allows you to manually edit a data list (typically a list
of customer names).
For example, suppose Data1 is configured for customer name:
CUSTOMER
JOE
5
Data1 label (customer in this example)
Name of the customer number 5
Customer number 5
To access the Data List function:
1. Press
M N O
.
2. Use
5
6
to scroll to DataList.
3. Press to select.
To edit an existing customer name
1. Use
5
6
to scroll to the name, then press .
2. You are now in Edit mode. Make the necessary changes.
3. Press
to accept the new name.
To add a new customer name
1. Press .
2. The Loadrite will find the next available empty slot in the list and put
you in Edit mode.
3. Press
to accept the new name
For your convenience, the Loadrite automatically goes to the next slot for
your next new customer. If you do not have any more names to add, press
to leave the Edit mode.
To Next Page
Loading...
