Loadrite PRO - Product Management; To select a different product

LOADRITE PRO OPERATING MANUAL
22
Measuring a Tare weight
A Tare weight can be measured by the Loadrite. This is common when
finding the Tare weight of a pallet on the forks of a loader. (It is not normal
to measure the Tare weight when the Tare value is set to work on the
Total).
Lift the empty pallet past the trigger point.
The Loadrite beeps and displays the
weight.
Sand
0
50
Press
J K L
.
The Loadrite displays the measured weight
on the Tare screen.
Tare?
50
If necessary, edit the weight using the
keypad. Press to accept.
To turn on the function, enter a tare weight. To turn it off, enter a tare of
zero.